Name: 14'0 SURFTECH SUP DOWNWINDER RACE - BARK ELITE - 28"
Brand: SURFTECH
Price: 1858.2 EUR
Availability: InStock

14'0 SURFTECH SUP DOWNWINDER RACE - BARK ELITE - 28"

€3.097,00 €1.858,20 Save 40%

Tax included. Shipping calculated at checkout.

SURFTECH BARK Elite CONTENDER 14'0" X 26"

This sup is the result of a collaboration between Surftech, Joe Bark and the best paddlers in the world. It is made for racing with a fairly thin shape which will give you speed and reduce wind resistance! Its volume and size will give you more amplitude in your paddling and gliding . Its EVA foam pad will bring you comfort and optimal grip!

Dimensions: 14 "x 28"

Composition: Construction Pro Elite

Volume : 275 L, optimal flotation

Finials: 1 central fin box (fin included)

Pad: EVA foam for good grip under your feet

Handle for easy transport

12'6 SURFTECH SUP VAPOR RACE - BARK ELITE - 25"

€3.135,00 €1.881,00 Save 40%

Tax included. Shipping calculated at checkout.

SURFTECH BARK Elite CONTENDER 12'6" X 26"

This Sup Vapor from Surftech was designed by legend Joe Bark in collaboration with the best paddlers in the world ! It is a fine shaper board to gain maximum speed while reducing its grip in the wind. It has a minimal rocker to generate and maintain as much speed as possible. Finally, it has a pad which will give you more comfort and more grip. This Sup is made for racing, because its shape is geared towards speed!

Dimensions: 12.6 "x 26"

Composition: Waterproof foam pad compressed with carbon fiber and traditional fiber to make it an ultra light and impact resistant board.

Volume : 233 L, optimal flotation

Finials: 1 central fin box

Pad: EVA foam for good grip under your feet

Handle for easy transport

12'6 SURFTECH SUP CONTENDER RACE - BARK ELITE - 25"

12'6 SURFTECH SUP CONTENDER RACE - BARK ELITE - 25"

€3.097,00 €1.858,20 Save 40%

Tax included. Shipping calculated at checkout.

SURFTECH BARK Elite CONTENDER 12'6" X 25"

This BARK Contender Elite model resulting from the collaboration between Surftech and Joe Bark has a profiled nose , a very thin and pointed tail, while keeping a studied curve to make this board extremely fast.
The concave ergonomic deck is positioned so that the rower is perfectly positioned, giving it maximum control and glide.
It will therefore be ideal for racing, giving you all the speed and stability you need.

Dimensions: 12.6 "x 25"

Composition: Construction Pro Elite

Volume : 200 L, optimal flotation

Finials: 1 central fin box (fin included)

Pad: EVA foam for good grip under your feet

Handle for easy transport

12'6 SURFTECH SUP CONTENDER RACE - BARK ELITE - 26.8"

€3.030,00 €1.818,00 Save 40%

Tax included. Shipping calculated at checkout.

SURFTECH BARK Elite CONTENDER 12'6" X 26.8"

Discover the collaboration between Surftech , Joe bark and the best paddlers in the world! It's a board made for speed , its thin nose will give you good penetration in the water. Its fairly low rocker will improve your glide. Finally, its ultra comfortable pad will give you the perfect balance. Conclusion this sup brings together stability and speed.

Dimensions: 12.6 "x 26.8"

Composition: Construction Pro Elite

Volume : 203 L, optimal flotation

Finials: 1 central fin box (fin included)

Pad: EVA foam for good grip under your feet

Handle for easy transport

12'6 SURFTECH SUP APPLEBY RACE - BARK ELITE - 27"

€2.941,00 €1.764,60 Save 40%

Tax included. Shipping calculated at checkout.

Discover this sup designed for racing and therefore for speed. It is the result of a collaboration between Surftech , Joe Bark and the best paddlers in the world. The result ? A sup made for racing with a fairly thin shape which will give you speed and reduce wind resistance! Its EVA foam pad will bring you comfort and optimal grip !

Dimensions: 12.6 "x 27"

Composition: Construction Pro Elite

Volume : 206 L, optimal flotation

Finials: 1 central fin box (fin included)

Pad: EVA foam for good grip under your feet

Handle for easy transport

11'0 SURFTECH SUP CROSSOVER RACE - BARK ELITE - 28"

€1.733,00 €1.039,80 Save 40%

Tax included. Shipping calculated at checkout.

SURFTECH BARK Elite CROSSOVER 11'0" X 28"

Discover the Surftech Crossover model designed and shaped by the legend Joe Bark, it has been designed for use in calm waters or in the sea on glassy days. Its nose will bring you speed. It is thus a sup adapted for the ballade and the touring! Its width will give you all the stability you need and its smaller size than the other models of the range will allow you to move it more easily.

Dimensions: 11" x 28"

Weight: 11.56 kg

Composition: Pro Elite construction, fused cell EPS core, PVC reinforced footprint, high quality carbon and fibreglass inserts die-cast for optimum impact protection

Volume: 230 L, optimal flotation

Daggerboards: 1 central daggerboard case (daggerboard included)

Pad: EVA foam for a good grip under your feet

Handle for easy transport

14' NSP SUP FLATWATER RACE

€1.434,00 €860,40 Save 40%

Tax included. Shipping calculated at checkout.

NSP Epoxy molded Flatwater Race 14'

Developed for recreational participants, this flat water cruiser makes a wonderful touring & training board. Its volume & width offer stability for ease of use for riders of all sizes making a great "family mobile" for the kids and dog to jump on as well first fun flat water cruising.

Includes plugs for gear tie downs, a deck pad and integral handle

14' NSP SUP FLATWATER RACE - DC PRO CARBON - 23"

14' NSP SUP FLATWATER RACE - DC PRO CARBON - 23"

€3.933,00 €2.359,80 Save 40%

Tax included. Shipping calculated at checkout.

NSP DC Pro Carbon FLATWATER Race 14' X 23"

The Flatwater Race is designed for straight out speed in cairn to light conditions. The recessed deck with drainage holes provides a low centre of gravity, and it's narrow width, fiat rocker and slightly rolled hull make it lightning fast. lt doesn't push water like other designs and has a low wash tail to help prevent drafting.

PRO CARBON

100% Carbon deck and bottom
100% Carbon double wrapped rails
Carbon reinforced ﬁn box
Matt race ﬁnish
Thermoform EVA pads (4mm)
Trim guide in paddling zone
Inserts for GPS, GoPro, trip computer
Light weight race handles
100% Carbon Innegra tail rail
Bulbous nose
4x Accelerator vacuum system (AVS)*
Aerodynamic spray shield

All NSP DC race board shapes are designed by Alain Teurquetil and shaped by Dale Chapman with input from world champion Travis Grant

Pro Carbon is the NSP top tier pro race focused construction-designed for the accomplished elite level and professional rider looking for the ultimate in performance lt's a full carbon vacuum molded epoxy construction with lightweight PVC reinforcement in the dock

Pro-level refinement to plan shapes and overall profiles result in a range of boards that are stiff and highly responsive-the NSP pro team ride these boards all a round the world Pro level graphics and 3 tone, tri-density deck traction.

12'6 NSP SUP RACE - DC BRUSH CARBON - 28"

12'6 NSP SUP RACE - DC BRUSH CARBON - 28"

€2.519,00 €1.511,40 Save 40%

Tax included. Shipping calculated at checkout.

NSP DC Brush Carbon Surf Race 12'6" X 28"

The NSP DC Surf Race is designed for Battle of the Paddle style surf race performance. Maneuverable and sturdy by design, catches waves with ease and surfs remarkably well. Downwind abilities uncommonly found in a 12'6" race board.

BRUSH CARBON

Securecell water resistant EPS Core
PVC sandwich on the deck for strength
Vacuum bagged Biaxial carbon top and bottom
Unbelievably light and Incredibly stiff
Includes foam core Carbon Fibre fin
Includes 2 x Neoprene wrapped racing straps, inserts both sides on the nose for regular or goofy foot set up.

All NSP DC race board shapes are designed by Alain Teurquetil and shaped by Dale Chapman with input from world champion Travis Grant

Brushed Carbon is the NSP mid tier race focused construction -designed for the advanced or elite level rider looking fer an edge in performance Carbon vacuum molded epoxy construction with a wood inlay in the deck for superior durability

Further refinement to plan shapes and overall profiles result in a range of boards that are capable of winning races for the accomplished paddler.

12'6 NSP SUP FLATWATER RACE - DC PRO CARBON - 24"

12'6 NSP SUP FLATWATER RACE - DC PRO CARBON - 24"

€3.569,00 €2.141,40 Save 40%

Tax included. Shipping calculated at checkout.

NSP DC Pro Carbon FLATWATER Race 12'6" X 24"

The Flatwater Race is designed for straight out speed in cairn to light conditions. The recessed deck with drainage holes provides a low centre of gravity, and it's narrow width, fiat rocker and slightly rolled hull make it lightning fast. lt doesn't push water like other designs and has a low wash tail to help prevent drafting.

PRO CARBON

100% Carbon deck and bottom
100% Carbon double wrapped rails
Carbon reinforced ﬁn box
Matt race ﬁnish
Thermoform EVA pads (4mm)
Trim guide in paddling zone
Inserts for GPS, GoPro, trip computer
Light weight race handles
100% Carbon Innegra tail rail
Bulbous nose
4x Accelerator vacuum system (AVS)*
Aerodynamic spray shield

All NSP DC race board shapes are designed by Alain Teurquetil and shaped by Dale Chapman with input from world champion Travis Grant

Pro Carbon is the NSP top tier pro race focused construction-designed for the accomplished elite level and professional rider looking for the ultimate in performance lt's a full carbon vacuum molded epoxy construction with lightweight PVC reinforcement in the dock

Pro-level refinement to plan shapes and overall profiles result in a range of boards that are stiff and highly responsive-the NSP pro team ride these boards all a round the world Pro level graphics and 3 tone, tri-density deck traction

12'6 NSP SUP RACE - DC PRO CARBON - 29"

€3.193,00 €1.915,80 Save 40%

Tax included. Shipping calculated at checkout.

NSP DC Pro Carbon Surf Race 12'6" X 29"

The NSP DC Surf Race is designed for Battle of the Paddle style surf race performance. Maneuverable and sturdy by design, catches waves with ease and surfs remarkably well. Downwind abilities uncommonly found in a 12'6" race board.

PRO CARBON

100% Carbon deck and bottom
100% Carbon double wrapped rails
Carbon reinforced ﬁn box
Matt race ﬁnish
Thermoform EVA pads (4mm)
Trim guide in paddling zone
Inserts for GPS, GoPro, trip computer
Light weight race handles
100% Carbon Innegra tail rail
Bulbous nose
4x Accelerator vacuum system (AVS)*
Aerodynamic spray shield

All NSP DC race board shapes are designed by Alain Teurquetil and shaped by Dale Chapman with input from world champion Travis Grant

Pro Carbon is the NSP top tier pro race focused construction-designed for the accomplished elite level and professional rider looking for the ultimate in performance lt's a full carbon vacuum molded epoxy construction with lightweight PVC reinforcement in the dock

Pro-level refinement to plan shapes and overall profiles result in a range of boards that are stiff and highly responsive-the NSP pro team ride these boards all a round the world Pro level graphics and 3 tone, tri-density deck traction

PROCESSOR 10'6" - MLX MOLDED EPOXY

€1.350,00

Tax included. Shipping calculated at checkout.

Our unique molded construction makes the board stiff, strong and ultra durable. Thanks to the specific shell we use on top and bottom the SUP is shock and impact proof.

FEATURE

- Hi-Density EPS core

- Laminated Epoxy fiberglass layer

- Hi Density PVC/PC shell

- Reinforced rail tape

- USBox Fins x1

- FX1 laterals x2

- EVA traction grip

- Carrying handle (x3)

PROCESSOR 10’6’’ / W: 33’’ / T: 4.8’’

Color: White/Teal/Yellow